Shrink map
Only Anchor Points.

European Themeroute | Iron and Steel

Two steps are needed to make iron and steel – the key materials of the industrial era - from iron ore. First, the ore has to be smelted in the blast furnace to produce pig iron, which is then refined in the fire to produce wrought iron or steel. Both steps are dependent on the type of fuel used. Hard ... more

Icon: Iron and SteelThe glow of the blast furnaces. European Theme Route Iron & Steel

Two steps are needed to make iron and steel – the key materials of the industrial era - from iron ore. First, the ore has to be smelted in the blast furnace to produce pig iron, which is then refined in the fire to produce wrought iron or steel. Both steps are dependent on the type of fuel used. Hard coal is not suitable for producing iron because its trace elements, above all sulphur, can damage the metal. For this reason charcoal was used in furnaces and forges until the start of the 18th century when a shortage of firewood made it very expensive. Thereupon Abraham Darby, the owner of an ironworks in the Midlands county of Shropshire which was rich in coal, resorted to a fuel that was used in malt houses and coked the coal hermetically. In this way he was able to remove the harmful trace elements. From 1709 onwards Darby was able to use coke to produce iron in his blast furnace at Coalbrookdale. 

This was a decisive step. Nonetheless many decades were to pass before the new fuel could establish itself: since a huge amount of coke was necessary to make iron and steel, it was only economically viable in mass production in large furnaces. But the technical preconditions were still not in place; more than anything else powerful blowing engines were needed. 

Hard coal was soon to revolutionise refining processes. The second step in producing wrought iron is necessary because, when the pig iron emerges from the blast furnace it still contains a very high proportion of carbon. True, you can cast it: but it is too brittle either to forge or roll. The carbon is therefore burnt off at high temperatures and the resulting iron can be processed in many different ways. During this process it is vital to prevent the pig iron from coming into direct contact with the coke, which still contains many destructive elements. In 1740 a Sheffield man named Benjamin Huntsman came up with a solution. He filled the pig iron into closed crucibles which were then heated up in a coke oven. The result was steel – but later regulations prescribed that steel should not contain more than 1.6% of carbon. For many decades hard crucible steel was in great demand as a valuable basic material, and the region around Sheffield became a centre for the iron industry. 

In 1784 Henry Cort came up with an alternative: he refined pig iron in a half-open furnace, on which the iron was separated from the burning coal only by a low wall. The hot air from the furnace was conducted over the pig iron to heat it. At the same time it was stirred by a worker with a long rod to release the carbon into the air. The result of this "puddling" process was a highly resilient iron which could be used equally for making swords and ploughshares. Cort also invented the heavy rolling process, whereby the iron could be shaped into sheet iron, pipes and railway lines. Now iron began to replace timber as the universal working material and chimneys and blast furnaces began to spring up at ironworks in the coalfields of Shropshire and Staffordshire, in the south of Scotland and in Wales. By the end of the 19th century Great Britain had become the world's largest producer of iron.

The government in France now began to commit all its efforts to producing iron, not least because it was afraid it would fall behind in the manufacture of arms. It lured over British experts to France and in the 1780s set up the Royal Foundries at Le Creusot in Burgundy. Like the glassworks, also at Le Creusot, and the older salt works at Arc et Senans, the symmetrically designed plant reflected the centralised industrial policies of the French state. 

Other European regions only reached the level of British industry in the 19th century. The Belgian iron region around the rivers Sambre and Maas received a boost in 1827 when the first coke furnace went into action in Charleroi. The German iron industry originated in Upper Silesia and the Saar region: other isolated works arose in the countryside, like those in Wetter in the Ruhrgebiet and Rasselstein, near Neuwied. But the German economy only really began to get moving in 1834 with the establishment of the Customs Union. Within the space of a few decades a close-knit industrial topography sprang up in the Ruhrgebiet, dominated by pithead towers, blast furnaces and working-class housing settlements. 

In 1828 a Scotsman by the name of James Beaumont Neilson came up with the last vital improvement to blast furnaces. He discovered that, by blowing in hot air, it was possible to drastically reduce the amount of coke needed. Production exploded in the subsequent years. In 1850 Great Britain was producing at least 10 times as much pig iron as it was at the start of the century; by 1900 more than 30 times as much.

Give the boom in iron, it was not long before the next technical advance occurred. In 1856 Henry Bessemer, yet another Englishman, invented a refractory-lined pear-shaped vessel for refining iron. When it was filled with pig iron and blasted with air, a spectacular reaction occurred within the Bessemer converter. The silicon burnt off and heated the glowing iron to such an extent that almost all the carbon was removed, without having to insert any fuel from outside. The result was high-quality Bessemer steel which could be used to manufacture cannons, railway lines and knives. 

Almost at the same time competitors – this time on the Continent - were developing yet another alternative to the open refining furnace. Wilhelm Siemens used to the warmth from waste gases in his "regenerative furnace" to additionally heat up the combustion air needed to process the pig iron. In this way iron could be smelted at higher temperatures than had previously been possible, and at the same time fuel could be saved. A French ironworks owner by the name of Pierre Martin brought the process to maturity in 1864. The Siemens-Martin furnace was able to produce top quality steel like that needed for shipbuilding plates, and for many decades it was regarded as the very best method of producing steel.

But the more problems in processing poor quality iron ore containing phosphorus. In 1879 a chemist by the name of Sidney Gilchrist Thomas came up with a solution. He had a Bessemer converter lined with a basic material which eliminated phosphorus. Now it was possible to use iron ore areas like Lorraine, for example; but the region which profited the most was the Ruhrgebiet. Here the steelworks were able to produce huge amounts of wire, pipes, and construction steel - not to mention railway lines - from low quality steel. 

Again in 1879, Wilhelm Siemens succeeded in making a further improvement. His electric arc furnace was able to produce very high temperatures with ease. That said, electric power was more expensive than coke. For this reason the process was initially restricted to the manufacture of highly stable steel which was alloyed with chromium, nickel or tungsten. The resulting material could be used to make large corrugated sheets, marine propellers, armour plating and engineering tools. It was only after the First World War that electric steel was mass manufactured. By that time steel production in Great Britain, the cradle of industrialisation, had been overtaken by the USA and Germany.

Related Links
Hüttenberg is a former mining town in Carinthia which has suffered since 1978 from the closure of mines and associated industries. The Carinthian Land Exhibition in 1995 attempted to revitalise the area by displaying its mining heritage and creating an open air museum to display the history of iron ...

Hüttenberg Show Mine | Heft Open Air Museum
Hüttenberg Show Mine
Knappenberg 32
A-9376 Hüttenberg, Austria

Linz | Austria
The most significant innovation in the making of mild steel during the 20th century was made at Linz. Here in 1949 molten pig iron was decarburized by the insertion of oxygen lances to produce mild steel. This process, with many variations, is now used throughout the world. It is known as the basic ...

Voestalpine Steel World
Voestalpine Strasse 4
4020 Linz, Austria

Vienna | Austria
The technical museum in Vienna holds many artefacts of significance to the industrial history of Europe. It was formally established in 1908, with Dr Ludwig Erhard as its director, as part of the jubilee celebrations of the Emperor Franz Josef, but it was not opened until 1918. The museum has an ...

Technical Museum
212 Mariahilfer Strasse
1140 Vienna, Austria

Ybbsitz | Austria
The area around the market town of Ybbitz, 35 km south-east of Steyr, and 45 km north of the Iron Mountain was celebrated from the sixteenth century for the products of the many smiths who settled there, which were exported to distant parts of Europe. The region continues to produce steel wire, ...

FERRUM. The World of Iron
Markt 24
3341 Ybbsitz, Austria

The contrast could scarcely be greater: the little town of Amay, with its old town centre, narrow alleyways, mansions and cloisters situated idyllically in the Mass valley, in the shadows of the massive cooling towers of the Huy atomic power station. Baroque middle-class splendour right next to the ...

Les Maitres du Feu - Route du Feu
Maîtres du feu à Amay – Route du feu
Rue de Bende 5
B-4540 Amay, Belgium

Hornu | Belgium
Coal mining at St Ghislain and Hornu, 8 km W of Mons, began in the 1770s. In 1810 the mines were acquired by the Frenchman Henri de Gorge Legrand (1774-1832). In 1816, having declared that he was ‘trying to attract strong men by-unheard of comforts’, he began the construction of a workers village in ...

Grand Hornu
Grand-Hornu Images
rue Sainte-Louise 82
7301 Hornu, Belgium

The location and the building fit the museum perfectly: an old industrial quarter somewhat away from the centre of Liège, a disused sheet metal factory, which was set up by the Dothée brothers in 1848 – this is the site of the Maison de la Metallurgie. The house, which covers 2,5000 square metres, ...

Maison de la Metallurgie et de l´Industrie de Liège - Route du Feu
Boulevard Raymond Poincaré 17
4020 Liège, Belgium

The St Michael blast furnace, in the forest of St Hubert, was built in 1771 by Dom Nicolas Spirlet, the last abbot of the nearby monastery, worked until 1942, and was designated an historical monument in 1952. It is one of the best-preserved in Europe, and retains its stack, casting house and ...

Fourneau Saint Michel. Musee du fer et de la metallurgie ancienne
6870 Saint Hubert, Belgium

Adamov | Czech Republic
The ironworks at Adamov 15 km N of Brno probably began operation in the 16th century, but the blast furnace that is now the centre of a conserved historic site was built in 1752, and rebuilt in the 1840s. It is a stone structure, with a restored charging that stands at the foot of a wooded slope. ...

Old Ironworks
Stará huť
679 04 Adamov, Czech Republic

Pribram VI - Brezové Hory | Czech Republic
The Pribram region of Bohemia was important for the mining of silver from the middle ages, of coal from the late 18th century, and of uranium after the Second World War. The principal mining museum in the Czech republic is centred round the Vojtech mine of 1779, which in 1875 reached a depth of 1000 ...

Príbram Museum of Mining
Hornické muzeum Pribram
Námesti Hynka Klicky 293
261 01 Príbram, Czech Republic

Nykøbing Mors | Denmark
The foundry museum at Nykøbing on the island of Mors in northern Jutland portrays the kind of enterprises that flourished in the nineteenth century in market towns, not only in Denmark but in most countries of Western Europe. The Morsø Iron Foundry was established in 1853 by N A Christensen (d ...

Danish Foundry Museum
Danske Støberimuseum
Nørregade 13
7900 Nykøbing Mors, Denmark

Svenstrup | Denmark
The Godthaab Hammerworks produced tools for farmers and for the construction industry for 119 years. It is located in the village of Nuuk in the municipality of Sventrup, 9 km south-west of the city of Aalborg in north Jutland. The works was established in 1858 by Christian Zinck (1807-83), an ...

The Godthaab Hammerworks
Godthaab Hammerværk
Zincksvej 2B
9230 Svenstrup, Denmark

Fagervik | Finland
The well-preserved Fagervik ironworks at Inga (Inkoo) is architecturally the most distinguished in Sweden. It was established by Carl Billsten in 1646, and ceased production in 1902. The blast furnace was demolished in the late 18th century, and replaced by a water mill but two forge buildings ...

Fagervik Ironworks
Fagervik gårds väg
10250 Fagervik, Finland

Fiskars | Finland
The ironworks founded in 1649 at Fiskars 78 km west of Helsinki by Peter Thorwöste has had a continuous history since that time and its work is carried on by the Fiskars Corporation which moved out of Fiskars village to new premises from the 1980s. In the eighteenth century Scots were prominent in ...

Fiskars Museum

Peltorivi 13
10470 Fiskars, Finland

Karkkila | Finland
Karkkila is an old industrial town set amongst hundreds of lakes where the Foundry Museum of Finland is located in the former main office of the local foundry. Displays illustrate working methods in foundries, demonstrating the ways in which moulders used their tools. There are displayed of products ...

Foundry Museum of Finland
Sumen Valimo Museo
03600 Karkkila, Finland

Ruotsinpyhtää | Finland
The Stromfors ironworks at Ruotsinpyhtaa near the south coast of Finland was founded in the late 1690s, at first producing bar iron from Swedish pig iron. Subsequently a blast furnace was built. The principal surviving building is a red brick water-powered forge of 1871 in which charcoal was used in ...

Strömfors Ironworks Museum
Ruukintie 11A Kirkonkyla
7970 Ruotsinpyhtää, Finland

The museum at Paddle in Normandy is one of the best places in Europe at which to observe the Walloon forge method of making wrought-iron, from which evolved the finery-and-chafery process. Ironworkers from this region took the blast furnace to England in the late 15th century. The Aube furnace made ...

Musee de la Grosse Forge d’Aube
Rue de la vieille Forge
61270 Aube, France

Buffon | France
The integrated ironworks near Montbard, established in 1768-72 by the great naturalist Georges-Louis Leclerc de Buffon (1707-82), incorporated the most advanced thinking of its era. It consists of a blast furnace, a finery-and-chafery forge and a slitting mill, all powered by water. The works closed ...

La Grande Forge de Buffon
La Grande Forge de Buffon
Les Champs de la Forge
21500 Buffon, France

Creil | France
The nailworks at Creil in the département of l’Oise was established in 1888 by Théodor Rivierre (d 1900). By 1914 it had some 400 employees, but there were only just over a hundred in the 1960s. It continues to operate in its original buildings. It is now the last of its kind in France and was ...

The Rivierre Nailworks
La Clouterie Rivierre
6 Rue des Usines
60100 Creil, France

Étueffont | France
Étueffont is a small village on the River Lamadeleine near Belfort in France-Comté within the Ballon des Vosges Regional Natural Park. The museum commemorate the Petitjean family, four generations of whom worked as artisan blacksmiths in the village. Like craftsmen in many parts of Europe they ...

Forge Musée d’Étueffon
2 Rue de Lamadeleine
90170 Étueffont, France

This website uses cookies