Shrink map
Only Anchor Points.

European Themeroute | Iron and Steel

Two steps are needed to make iron and steel – the key materials of the industrial era - from iron ore. First, the ore has to be smelted in the blast furnace to produce pig iron, which is then refined in the fire to produce wrought iron or steel. Both steps are dependent on the type of fuel used. Hard ... more

Icon: Iron and SteelThe glow of the blast furnaces. European Theme Route Iron & Steel

Two steps are needed to make iron and steel – the key materials of the industrial era - from iron ore. First, the ore has to be smelted in the blast furnace to produce pig iron, which is then refined in the fire to produce wrought iron or steel. Both steps are dependent on the type of fuel used. Hard coal is not suitable for producing iron because its trace elements, above all sulphur, can damage the metal. For this reason charcoal was used in furnaces and forges until the start of the 18th century when a shortage of firewood made it very expensive. Thereupon Abraham Darby, the owner of an ironworks in the Midlands county of Shropshire which was rich in coal, resorted to a fuel that was used in malt houses and coked the coal hermetically. In this way he was able to remove the harmful trace elements. From 1709 onwards Darby was able to use coke to produce iron in his blast furnace at Coalbrookdale. 

This was a decisive step. Nonetheless many decades were to pass before the new fuel could establish itself: since a huge amount of coke was necessary to make iron and steel, it was only economically viable in mass production in large furnaces. But the technical preconditions were still not in place; more than anything else powerful blowing engines were needed. 

Hard coal was soon to revolutionise refining processes. The second step in producing wrought iron is necessary because, when the pig iron emerges from the blast furnace it still contains a very high proportion of carbon. True, you can cast it: but it is too brittle either to forge or roll. The carbon is therefore burnt off at high temperatures and the resulting iron can be processed in many different ways. During this process it is vital to prevent the pig iron from coming into direct contact with the coke, which still contains many destructive elements. In 1740 a Sheffield man named Benjamin Huntsman came up with a solution. He filled the pig iron into closed crucibles which were then heated up in a coke oven. The result was steel – but later regulations prescribed that steel should not contain more than 1.6% of carbon. For many decades hard crucible steel was in great demand as a valuable basic material, and the region around Sheffield became a centre for the iron industry. 

In 1784 Henry Cort came up with an alternative: he refined pig iron in a half-open furnace, on which the iron was separated from the burning coal only by a low wall. The hot air from the furnace was conducted over the pig iron to heat it. At the same time it was stirred by a worker with a long rod to release the carbon into the air. The result of this "puddling" process was a highly resilient iron which could be used equally for making swords and ploughshares. Cort also invented the heavy rolling process, whereby the iron could be shaped into sheet iron, pipes and railway lines. Now iron began to replace timber as the universal working material and chimneys and blast furnaces began to spring up at ironworks in the coalfields of Shropshire and Staffordshire, in the south of Scotland and in Wales. By the end of the 19th century Great Britain had become the world's largest producer of iron.

The government in France now began to commit all its efforts to producing iron, not least because it was afraid it would fall behind in the manufacture of arms. It lured over British experts to France and in the 1780s set up the Royal Foundries at Le Creusot in Burgundy. Like the glassworks, also at Le Creusot, and the older salt works at Arc et Senans, the symmetrically designed plant reflected the centralised industrial policies of the French state. 

Other European regions only reached the level of British industry in the 19th century. The Belgian iron region around the rivers Sambre and Maas received a boost in 1827 when the first coke furnace went into action in Charleroi. The German iron industry originated in Upper Silesia and the Saar region: other isolated works arose in the countryside, like those in Wetter in the Ruhrgebiet and Rasselstein, near Neuwied. But the German economy only really began to get moving in 1834 with the establishment of the Customs Union. Within the space of a few decades a close-knit industrial topography sprang up in the Ruhrgebiet, dominated by pithead towers, blast furnaces and working-class housing settlements. 

In 1828 a Scotsman by the name of James Beaumont Neilson came up with the last vital improvement to blast furnaces. He discovered that, by blowing in hot air, it was possible to drastically reduce the amount of coke needed. Production exploded in the subsequent years. In 1850 Great Britain was producing at least 10 times as much pig iron as it was at the start of the century; by 1900 more than 30 times as much.

Give the boom in iron, it was not long before the next technical advance occurred. In 1856 Henry Bessemer, yet another Englishman, invented a refractory-lined pear-shaped vessel for refining iron. When it was filled with pig iron and blasted with air, a spectacular reaction occurred within the Bessemer converter. The silicon burnt off and heated the glowing iron to such an extent that almost all the carbon was removed, without having to insert any fuel from outside. The result was high-quality Bessemer steel which could be used to manufacture cannons, railway lines and knives. 

Almost at the same time competitors – this time on the Continent - were developing yet another alternative to the open refining furnace. Wilhelm Siemens used to the warmth from waste gases in his "regenerative furnace" to additionally heat up the combustion air needed to process the pig iron. In this way iron could be smelted at higher temperatures than had previously been possible, and at the same time fuel could be saved. A French ironworks owner by the name of Pierre Martin brought the process to maturity in 1864. The Siemens-Martin furnace was able to produce top quality steel like that needed for shipbuilding plates, and for many decades it was regarded as the very best method of producing steel.

But the more problems in processing poor quality iron ore containing phosphorus. In 1879 a chemist by the name of Sidney Gilchrist Thomas came up with a solution. He had a Bessemer converter lined with a basic material which eliminated phosphorus. Now it was possible to use iron ore areas like Lorraine, for example; but the region which profited the most was the Ruhrgebiet. Here the steelworks were able to produce huge amounts of wire, pipes, and construction steel - not to mention railway lines - from low quality steel. 

Again in 1879, Wilhelm Siemens succeeded in making a further improvement. His electric arc furnace was able to produce very high temperatures with ease. That said, electric power was more expensive than coke. For this reason the process was initially restricted to the manufacture of highly stable steel which was alloyed with chromium, nickel or tungsten. The resulting material could be used to make large corrugated sheets, marine propellers, armour plating and engineering tools. It was only after the First World War that electric steel was mass manufactured. By that time steel production in Great Britain, the cradle of industrialisation, had been overtaken by the USA and Germany.

Related Links
Legazpi | Spain
Legazpi, 45 km south-west of San Sebastian, is the chief town of the Urola-Garaia region. Ironmaking has a long history in the area, but the industry was of particular importance from the mid-nineteenth century until the contraction of the Patricio Echeverria company in the 1970s and 80s caused a ...

Basque Iron Museum
Museo del Hierro Vasco
Mirandaola Parkea Telleriate auzoa, z/g
20230 Legazpi, Spain

Portugalete (Vizcaya) | Spain
Portugalete is a municipality on the south–west bank of the River Nervión downstream from Bilbao, where the river is best known as the Ria de Bilbao. It is best known for the transporter bridge constructed in 1890-93 by the Vizcayan engineer Alberto Palacio Elisagüe (1856-1931). The industrial ...

RIALIA: Museum of Industry
RIALIA: Museo de la Industria
Paseo de la Canilla
48920 Portugalete, Spain

Ängelsberg | Sweden
Engelsbergs is one of the best-preserved ‘bruks’ (ironworking villages) in Sweden. Iron was made in the community from 1681 and the manor house in the French style was completed in the 1740s. The blast furnace, of earth and timber construction, dates in its present form from 1779, and worked until ...

Engelsbergs bruk
Information: Lilla Slaggarboden
Ängelsberg, Sweden

Avesta | Sweden
The remains of the ironworks at Avesta on the River Dalälven include some of the most important late-nineteenth century plant in Europe. A copper-smelting works established in 1638 was closed in 1872 and a new ironworks was then built on the site by the firm known from 1883 as Avesta Jernverks AB. ...

Koppardalen Verket
Kanalvägen 1
77441 Avesta, Sweden

Eskilstuna | Sweden
Eskilstuna is a planned industrial town of the mid-17th century, established for King Carl Gustaf in 1658 by Reinhold Rademacher. Twenty wooden smithy buildings, designed by the architect Jean de la Vallée, were laid out on a grid plan. Smiths, including nailers, locksmiths and cutlers, many of them ...

Radermacher’s Forges
Rademachergatan 50
632 20 Eskilstuna, Sweden

Finspång | Sweden
The water-powered ironworks at Finspong, 30 km west of Norrkoping was established in the late 16th century by the Walloon Wellam de Wijk. It came to specialise in the production of cast-iron cannon, and was energetically developed by two other Walloons, a father (d 1652) and son (1622-95) both ...

Finspang ironworks museum
Finspångs Bruksmuseum
Bruksgatan 25
612 30 Finspang, Sweden

Iggesund | Sweden
Iggesund is a small town in Hudiksvall municipality in Gävleborg county, 126 km north of the city of Gävle where an ironworks, consisting of a blast furnace, two Walloon forges and a hammer shop, was established in 1685 by Isaac Breant. It remained a small enterprise until the 1870s when it was ...

Iggemans Mill
Iggemans Bruksminnen
Malmvägen 15
82523 Iggesund, Sweden

Karlholmsbruk | Sweden
Karlsholm bruk was established in 1719 by the de Geer family, who were of Walloon origin, and is one of the most important monuments of the iron industry in Sweden. In the 18th century wrought-iron was made in a Walloon forge and rolled in a plate mill, but in 1879 a Lancashire forge was ...

Karlholms bruk
Karlholmsbruk, Sweden

Munkfors | Sweden
Munkfors is a community of great importance in the history of the Swedish iron industry. Mild steel was made there by the open hearth process for the first time in Sweden in 1868, and a building constructed in 1877 to accommodate open hearth furnaces, which worked until 1941, is preserved. The ...

Munkfors Bruk
Gamla Brukets Museer
Store Backe 6
68431 Munkfors, Sweden

The town of Nora, 24 km north-west of Örebro lies in the mining and ironworking region of the Bergslagen that was for centuries one of the principal sources of Sweden’s wealth. Pershyttan, 3 km south of the centre of Nora, is a former ironworking and mining village that since 2004 has been a 128 ha ...

Pershyttan Cultural Reserve
Pershyttan Kulturreservag Nora Turistbyrå (Nora Tourist Office)
Järnvägsgatan 1
713 31 Nora, Sweden

Nordmaling | Sweden
Olofsfors Bruk in Västerbotten county, on the shore of the Gulf of Bothnia, some 50 km south of Umeå, is an ironworking community established in 1762 to take advantage of the water-power available in the vicinity and the surrounding forests which yielded abundant quantities of charcoal fuel. Pig ...

Olofsfors Bruk
Stiftelsen Olofsfors Bruksmseum
Olofsfors 18
91491 Nordmaling, Sweden

Österbybruk | Sweden
The Dannemora mines, from the 15th century until 1992 produced ore that was low in phosphorus and sulphur, suitable for making iron well-suited for steel-making. Visitors can take a guided tour of 40 steep-sided open-cast workings, where a feature of particular interest is the building constructed ...

Dannemora Mine and Osterby Bruk
Vallonbruk I Uppland
Dannemora Gruvkontor
743 30 Österbybruk, Sweden

Sweden’s national museum of science and technology was founded in 1924 under the patronage of several of the country’s leading learned societies and industrial organisations. It is located in a building in the International Modern style designed by Ragnar Hjorth that was opened in 1946, and has ...

Museum of Science and Technology
Tekniska museet Box 27842
Museivagen 7
115 93 Stockholm, Sweden

Vallorbe | Switzerland
Vallorbe is a watch-making town, but the surrounding district in the Canton of Vaud was for centuries celebrated for iron working. The sites of three blast furnaces and 30 forges have been identified in the region. The museum shows how iron was worked in the Canton of Vaud from prehistoric ...

Iron and Railway Museum
Musee du fer et du chemin de fer
Rue des Grandes Forges 11
1337 Vallorbe, Switzerland

Istanbul | Turkey
The majority of the industrialist donated Rahmi Koç Museum is an excellent example of how historic industrial buildings a new use can feed.In the former anchor foundry of the Arsenal House (the shipyards) on the Golden Horn, the Koç-Foundation has set up an industrial museum, that gathered beside ...

Rahmi Koç Industrial Museum
Rahmi Koç Sanayi Müzesi Hasköy
Hasköy Caddesi 27
3445 Istanbul, Turkey

Aberdare | United Kingdom
The Museum tells the story of the social history of the Cynon Valley from 1800 to the present. Audio visual presentations in the gallery include films on the iron industry around 1830 and the Miner’s Strike of 1984/85. The displays explore issues such as sport, health, religion, popular culture, ...

Cynon Valley Museum and Art Gallery
Depot Road Gadlys
CF44 8DL Aberdare, United Kingdom

Barrow-in-Furness | United Kingdom
Barrow-in-Furness was one of the few wholly new towns that grew up during Britain’s Industrial Revolution. In the early nineteenth century it was a hamlet in the parish of Dalton with a tiny population. In the early 1840s the Furness Railway opened a wharf from which locally-mined iron ore could be ...

The Dock Museum
North Road
LA14 2PW Barrow-in-Furness, United Kingdom

Blackpool | United Kingdom
One of the most recognised landmarks in the region owes its existence to Victorian engineering ingenuity, opening in 1894 at a cost of £64,000. Situated on the seafront between the North and Central Piers, today the Tower is an entertainment mecca, featuring a circus, aquarium and major family shows ...

Blackpool Tower
Bank Hey Street
FY1 4BJ Blackpool, United Kingdom

Blaenavon | United Kingdom
Blaenavon Ironworks began production in 1789 and is now the best preserved ironworks of its period in the world it is a Scheduled Ancient Monument. The site is the main focus of the Blaenavon Industrial Landscape which was inscribed by UNESCO in December 2000 as a World Heritage Site. In the early ...

Blaenavon Ironworks World Heritage Site
North Street
NP4 9RN Blaenavon, United Kingdom

Bridgend | United Kingdom
The blast furnace at Cefn Cribwr, 6 km NW Bridgend, produced iron for about 50 years from its foundation by John Bedford in the 1780s until 1836. Its remains, acquired by the local authority in 1987, have been uncovered and conserved and are now incorporated in Bedford Park. Cefn Cribwr is one of ...

Cefn Cribwr Furnace
Bedford Park Cefn Cribwr Kenfig Hill
Bridgend, United Kingdom