spinner
+
Shrink map
Only Anchor Points.

European Themeroute | Iron and Steel

Two steps are needed to make iron and steel – the key materials of the industrial era - from iron ore. First, the ore has to be smelted in the blast furnace to produce pig iron, which is then refined in the fire to produce wrought iron or steel. Both steps are dependent on the type of fuel used. Hard ... more

Icon: Iron and SteelThe glow of the blast furnaces. European Theme Route Iron & Steel

Two steps are needed to make iron and steel – the key materials of the industrial era - from iron ore. First, the ore has to be smelted in the blast furnace to produce pig iron, which is then refined in the fire to produce wrought iron or steel. Both steps are dependent on the type of fuel used. Hard coal is not suitable for producing iron because its trace elements, above all sulphur, can damage the metal. For this reason charcoal was used in furnaces and forges until the start of the 18th century when a shortage of firewood made it very expensive. Thereupon Abraham Darby, the owner of an ironworks in the Midlands county of Shropshire which was rich in coal, resorted to a fuel that was used in malt houses and coked the coal hermetically. In this way he was able to remove the harmful trace elements. From 1709 onwards Darby was able to use coke to produce iron in his blast furnace at Coalbrookdale. 

This was a decisive step. Nonetheless many decades were to pass before the new fuel could establish itself: since a huge amount of coke was necessary to make iron and steel, it was only economically viable in mass production in large furnaces. But the technical preconditions were still not in place; more than anything else powerful blowing engines were needed. 

Hard coal was soon to revolutionise refining processes. The second step in producing wrought iron is necessary because, when the pig iron emerges from the blast furnace it still contains a very high proportion of carbon. True, you can cast it: but it is too brittle either to forge or roll. The carbon is therefore burnt off at high temperatures and the resulting iron can be processed in many different ways. During this process it is vital to prevent the pig iron from coming into direct contact with the coke, which still contains many destructive elements. In 1740 a Sheffield man named Benjamin Huntsman came up with a solution. He filled the pig iron into closed crucibles which were then heated up in a coke oven. The result was steel – but later regulations prescribed that steel should not contain more than 1.6% of carbon. For many decades hard crucible steel was in great demand as a valuable basic material, and the region around Sheffield became a centre for the iron industry. 

In 1784 Henry Cort came up with an alternative: he refined pig iron in a half-open furnace, on which the iron was separated from the burning coal only by a low wall. The hot air from the furnace was conducted over the pig iron to heat it. At the same time it was stirred by a worker with a long rod to release the carbon into the air. The result of this "puddling" process was a highly resilient iron which could be used equally for making swords and ploughshares. Cort also invented the heavy rolling process, whereby the iron could be shaped into sheet iron, pipes and railway lines. Now iron began to replace timber as the universal working material and chimneys and blast furnaces began to spring up at ironworks in the coalfields of Shropshire and Staffordshire, in the south of Scotland and in Wales. By the end of the 19th century Great Britain had become the world's largest producer of iron.

The government in France now began to commit all its efforts to producing iron, not least because it was afraid it would fall behind in the manufacture of arms. It lured over British experts to France and in the 1780s set up the Royal Foundries at Le Creusot in Burgundy. Like the glassworks, also at Le Creusot, and the older salt works at Arc et Senans, the symmetrically designed plant reflected the centralised industrial policies of the French state. 

Other European regions only reached the level of British industry in the 19th century. The Belgian iron region around the rivers Sambre and Maas received a boost in 1827 when the first coke furnace went into action in Charleroi. The German iron industry originated in Upper Silesia and the Saar region: other isolated works arose in the countryside, like those in Wetter in the Ruhrgebiet and Rasselstein, near Neuwied. But the German economy only really began to get moving in 1834 with the establishment of the Customs Union. Within the space of a few decades a close-knit industrial topography sprang up in the Ruhrgebiet, dominated by pithead towers, blast furnaces and working-class housing settlements. 

In 1828 a Scotsman by the name of James Beaumont Neilson came up with the last vital improvement to blast furnaces. He discovered that, by blowing in hot air, it was possible to drastically reduce the amount of coke needed. Production exploded in the subsequent years. In 1850 Great Britain was producing at least 10 times as much pig iron as it was at the start of the century; by 1900 more than 30 times as much.

Give the boom in iron, it was not long before the next technical advance occurred. In 1856 Henry Bessemer, yet another Englishman, invented a refractory-lined pear-shaped vessel for refining iron. When it was filled with pig iron and blasted with air, a spectacular reaction occurred within the Bessemer converter. The silicon burnt off and heated the glowing iron to such an extent that almost all the carbon was removed, without having to insert any fuel from outside. The result was high-quality Bessemer steel which could be used to manufacture cannons, railway lines and knives. 

Almost at the same time competitors – this time on the Continent - were developing yet another alternative to the open refining furnace. Wilhelm Siemens used to the warmth from waste gases in his "regenerative furnace" to additionally heat up the combustion air needed to process the pig iron. In this way iron could be smelted at higher temperatures than had previously been possible, and at the same time fuel could be saved. A French ironworks owner by the name of Pierre Martin brought the process to maturity in 1864. The Siemens-Martin furnace was able to produce top quality steel like that needed for shipbuilding plates, and for many decades it was regarded as the very best method of producing steel.

But the more problems in processing poor quality iron ore containing phosphorus. In 1879 a chemist by the name of Sidney Gilchrist Thomas came up with a solution. He had a Bessemer converter lined with a basic material which eliminated phosphorus. Now it was possible to use iron ore areas like Lorraine, for example; but the region which profited the most was the Ruhrgebiet. Here the steelworks were able to produce huge amounts of wire, pipes, and construction steel - not to mention railway lines - from low quality steel. 

Again in 1879, Wilhelm Siemens succeeded in making a further improvement. His electric arc furnace was able to produce very high temperatures with ease. That said, electric power was more expensive than coke. For this reason the process was initially restricted to the manufacture of highly stable steel which was alloyed with chromium, nickel or tungsten. The resulting material could be used to make large corrugated sheets, marine propellers, armour plating and engineering tools. It was only after the First World War that electric steel was mass manufactured. By that time steel production in Great Britain, the cradle of industrialisation, had been overtaken by the USA and Germany.

Related Links
The location and the building fit the museum perfectly: an old industrial quarter somewhat away from the centre of Liège, a disused sheet metal factory, which was set up by the Dothée brothers in 1848 – this is the site of the Maison de la Metallurgie. The house, which covers 2,5000 square metres, ...
more

Maison de la Metallurgie et de l´Industrie de Liège - Route du Feu
Boulevard Raymond Poincaré 17
4020 Liège, Belgium

The St Michael blast furnace, in the forest of St Hubert, was built in 1771 by Dom Nicolas Spirlet, the last abbot of the nearby monastery, worked until 1942, and was designated an historical monument in 1952. It is one of the best-preserved in Europe, and retains its stack, casting house and ...
more

Fourneau Saint Michel. Musee du fer et de la metallurgie ancienne
6870 Saint Hubert, Belgium

Adamov | Czech Republic
The ironworks at Adamov 15 km N of Brno probably began operation in the 16th century, but the blast furnace that is now the centre of a conserved historic site was built in 1752, and rebuilt in the 1840s. It is a stone structure, with a restored charging that stands at the foot of a wooded slope. ...
more

Old Ironworks
Stará huť
679 04 Adamov, Czech Republic

Pribram VI - Brezové Hory | Czech Republic
The Pribram region of Bohemia was important for the mining of silver from the middle ages, of coal from the late 18th century, and of uranium after the Second World War. The principal mining museum in the Czech republic is centred round the Vojtech mine of 1779, which in 1875 reached a depth of 1000 ...
more

Príbram Museum of Mining
Hornické muzeum Pribram
Námesti Hynka Klicky 293
261 01 Príbram, Czech Republic

Svenstrup | Denmark
The Godthaab Hammerworks produced tools for farmers and for the construction industry for 119 years. It is located in the village of Nuuk in the municipality of Sventrup, 9 km south-west of the city of Aalborg in north Jutland. The works was established in 1858 by Christian Zinck (1807-83), an ...
more

The Godthaab Hammerworks
Godthaab Hammerværk
Zincksvej 2B
9230 Svenstrup, Denmark

Fagervik | Finland
The well-preserved Fagervik ironworks at Inga (Inkoo) is architecturally the most distinguished in Sweden. It was established by Carl Billsten in 1646, and ceased production in 1902. The blast furnace was demolished in the late 18th century, and replaced by a water mill but two forge buildings ...
more

Fagervik Ironworks
Fagervik gårds väg
10250 Fagervik, Finland

Ruotsinpyhtää | Finland
The Stromfors ironworks at Ruotsinpyhtaa near the south coast of Finland was founded in the late 1690s, at first producing bar iron from Swedish pig iron. Subsequently a blast furnace was built. The principal surviving building is a red brick water-powered forge of 1871 in which charcoal was used in ...
more

Strömfors Ironworks Museum
Ruukintie 11A Kirkonkyla
7970 Ruotsinpyhtää, Finland

The museum at Paddle in Normandy is one of the best places in Europe at which to observe the Walloon forge method of making wrought-iron, from which evolved the finery-and-chafery process. Ironworkers from this region took the blast furnace to England in the late 15th century. The Aube furnace made ...
more

Musee de la Grosse Forge d’Aube
Rue de la vieille Forge
61270 Aube, France

Buffon | France
The integrated ironworks near Montbard, established in 1768-72 by the great naturalist Georges-Louis Leclerc de Buffon (1707-82), incorporated the most advanced thinking of its era. It consists of a blast furnace, a finery-and-chafery forge and a slitting mill, all powered by water. The works closed ...
more

La Grande Forge de Buffon
La Grande Forge de Buffon
Les Champs de la Forge
21500 Buffon, France

Creil | France
The nailworks at Creil in the département of l’Oise was established in 1888 by Théodor Rivierre (d 1900). By 1914 it had some 400 employees, but there were only just over a hundred in the 1960s. It continues to operate in its original buildings. It is now the last of its kind in France and was ...
more

The Rivierre Nailworks
La Clouterie Rivierre
6 Rue des Usines
60100 Creil, France

Étueffont | France
Étueffont is a small village on the River Lamadeleine near Belfort in France-Comté within the Ballon des Vosges Regional Natural Park. The museum commemorate the Petitjean family, four generations of whom worked as artisan blacksmiths in the village. Like craftsmen in many parts of Europe they ...
more

Forge Musée d’Étueffon
2 Rue de Lamadeleine
90170 Étueffont, France

Jarville-la-Malgrange | France
The museum at Nancy has one of the most comprehensive collections in Europe illustrating the history of iron-making, with displays that incorporate artefacts, works of art and extracts from literature. The displays take an historical rather than a technological approach, and show the progress of ...
more

Museum of the history of iron
Musee de l’Histoire de Fer
Avenue du General de Gaulle BP 15
54140 Jarville-la-Malgrange, France

Le Creusot | France
Le Creusot in Burgundy is a place of prime importance in the industrial history of Europe. In the 1780s ironworks and glassworks utilising technology from England were established there by William Wilkinson, and the evidence of migration of workers is provided by the settlement called la combe des ...
more

Creusot-Montceau Ecomuseum
Chateau de la Verrerie
71200 Le Creusot, France

Nans-sous-Sainte-Anne | France
Nans-sous-Sainte-Anne is a small village in Savoie in the department of Doubs, 44 km south of Besançon, celebrated for its edge tool forge powered by the Archange river, which has been recognised as an ancient monument since 1984 and now attracts some 25,000 visitors a year. It is open during the ...
more

Edge Tool Forge
Taillanderie
Lieu-dit La Doye
15330 Nans-sous-Sainte-Anne, France

Savignac-Lédrier | France
The ironworks at Savignac-Lédrier in the valley of Auvézère in the Périgord dates from the 1520s and lies beneath a Renaissance castle built by its first owners. It continued in production, still using charcoal as its fuel and water-power for its bellows, hammers and mills until 1930, when the blast ...
more

Savignac-Lédrier Ironworks
Forge de Savignac-Lédrier
24270 Savignac-Lédrier, France

Syam | France
Ironworking at Syam, at the confluence of the rivers Ain and Saine, south of Champangnole in the Jura, has a long history. In the late eighteenth century it was believed that the tilt-hammer forge in the village had been working since time immemorial. Certainly it was operating in 1690, and it was ...
more

Les Forges de Syam
Route de Champagnole
30300 Syam, France

Altena | Germany
The buildings of the hospitality (or tourist) industry, hotels, wayside inns, motorway service stations, are readily recognised as part of the industrial heritage. One of the most significant innovations in the industry in the twentieth century was the proliferation of youth hostels providing ...
more

Altena Castel
Fritz-Thomee-Strasse 80
58762 Altena, Germany

Annaberg-Buchholz | Germany
The water-powered Frohnauer Hammer is the centrepiece of a restored iron forge at Annaberg-Buchholz that is one of the most important iron-working monuments in the Erzgebirge. The timber-framed building of 1436 was originally a corn mill, but was later adapted as a mint and a hammer forge. Visitors ...
more

Frohnauer Hammer Museum
Sehmatalstrasse 3
09456 Annaberg-Buchholz, Germany

Brandenburg an der Havel | Germany
All the rest have long since been sent for scrap. One furnace after another disappeared and in the huge hall demolition proceeded apace. But then a group of determined workers got together to save what was left to be saved. And this is how the last Siemens-Martin furnace in western Europe has ...
more

Industrial Museum
August-Sonntag-Straße 5
14770 Brandenburg an der Havel, Germany

If you don’t believe that office work is bad for your health you should try the so-called “compulsory posture”, a kind of corset which imitates the unnatural position adopted by most people when they’re sitting in front of a computer. It is only one of countless experimentation points in the German ...
more

DASA - German Occupational Safety and Health Exhibition
Friedrich-Henkel-Weg 1-25
44149 Dortmund, Germany